Skip to main content

Circuit Diagram Car Parking System


 

Comments

  1. yoon laySeptember 6, 2024 at 7:05 AM

    This comment has been removed by the author.

    ReplyDelete
  2. yoon laySeptember 6, 2024 at 7:07 AM

    what website you use for draw circuit diagram

    ReplyDelete
    Replies
    1. Muntazir2008October 20, 2024 at 8:25 AM

      so in coclusion we need only 2 sensors?

      Delete
    2. LuizOctober 29, 2024 at 2:17 PM

      Use thinkercard its a very good option to see and simulate your project

      Delete
  3. GEMBURNovember 15, 2024 at 6:42 PM

    What name of component IR sensor like that on thinkercad?

    ReplyDelete
  4. जिज्ञासा-वेत्ताDecember 29, 2024 at 10:29 PM

    what If I have a 16 by 1 Display

    ReplyDelete
  5. AnonymousMay 13, 2025 at 1:34 AM

    where can i take the ir sensor beacuse there isn't on tinckercad

    ReplyDelete
  6. AnonymousNovember 1, 2025 at 7:22 PM

    Can we use ultra sonic sensor in place of ir sensor

    ReplyDelete
    Replies
    1. AnonymousDecember 16, 2025 at 5:10 AM

      yes but the code will be different

      Delete
  7. AnonymousNovember 27, 2025 at 9:59 PM

    why is 6 afraid of 7, because 7 8 9. :OOO

    ReplyDelete
    Replies
    1. AnonymousFebruary 23, 2026 at 5:48 AM

      U so sus u will ask questions and answer it 🤣🤣🤣in the top

      Delete

Post a Comment

Popular posts from this blog

Solar Tracking System

Dual-Axis Solar Tracking System | Arduino SimpleCircuits Arduino Solar DIY Renewable Energy Project Dual-Axis Solar Tracking System Build a high-performance solar tracker that follows the sun in real-time. Four LDR sensors, an Arduino UNO, and two servo motors — boosting energy capture by up to 40% versus fixed mounts. 40% More Efficient 4 LDR Sensors 2 Servo Axes <300mA Power Draw Finished Build System Overview How the System Works The tracker reads the sky through four LDR sensors placed around the panel, computes intensity deltas, and drives two SG90 servos in a real-time closed loop — keeping the panel perpendicular to sunlight from sunrise to sunset. ...
21 comments
Read more

Arduino Code Car Parking System

 // Created by Simple Circuits  #include <Wire.h>  #include <LiquidCrystal_I2C.h> LiquidCrystal_I2C lcd(0x27,16,2);    #include <Servo.h>  Servo myservo; int IR1 = 2; int IR2 = 3; int Slot = 4;           //Total number of parking Slots int flag1 = 0; int flag2 = 0; void setup() {   Serial.begin(9600);      lcd.init(); //initialize the lcd     lcd.backlight(); //open the backlight     pinMode(IR1, INPUT); pinMode(IR2, INPUT);    myservo.attach(4); myservo.write(100); lcd.setCursor (0,0); lcd.print("     ARDUINO    "); lcd.setCursor (0,1); lcd.print(" PARKING SYSTEM "); delay (2000); lcd.clear();   } void loop(){  if(digitalRead (IR1) == LOW && flag1==0){ if(Slot>0){flag1=1; if(flag2==0){myservo.write(0); Slot = Slot-1;} }else{ lcd.setCursor (0,0); lcd.print("    SORRY :(    ");   lc...
30 comments
Read more

Arduino Code

 //define Pins #include <Servo.h> Servo servo; int trigPin = 11; int echoPin = 12; // defines variables long duration; int distance; void setup()  {   servo.attach(13);   servo.write(180);  delay(2000);    // Sets the trigPin as an Output pinMode(trigPin, OUTPUT); // Sets the echoPin as an Input  pinMode(echoPin, INPUT); } void loop()  { // Clears the trigPin digitalWrite(trigPin, LOW); delayMicroseconds(2); // Sets the trigPin on HIGH state for 10 micro seconds digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); // Reads the echoPin, returns the sound wave travel time in microseconds duration = pulseIn(echoPin, HIGH); // Calculating the distance distance= duration*0.034/2; // Prints the distance on the Serial Monitor Serial.print("Distance: "); Serial.println(distance); if ( distance <= 25   ) // Change Distance according to Ultrasonic Sensor Placement  { servo.write(180); delay(3000); ...
26 comments
Read more